Horus
简单几步,让你用ADSL上网 FreeBSD ADSL 安装Go!Go!Go!
1.配置网络连接
配置ppp.conf
先登录系统，这样：
Login: root (以Root用户登录)
Password: (输入你的密码，因安全问题，这里你看不到输入的结果.)
由于是ADSL上网，配置文件是 /etc/ppp下的 ppp.conf，在 /etc/ppp 下可能已经有了 ppp.conf 也可能只有 ppp.conf.sample ,总之,我放弃使用现有的ppp.conf 从ppp.conf.sample新建一个.你可以这样做:
# rm ppp.conf (删除ppp.conf , 如果有的话)
# cp ppp.conf.sample ppp.conf
# ee ppp.conf (随自己喜好,使用 ee 或 vi )
# cp ppp.conf.sample ppp.conf
# ee ppp.conf (随自己喜好,使用 ee 或 vi )
这里把我的ppp.conf 附上,以此为范本.
#################################################################
# PPP Sample Configuration File
# Originally written by Toshiharu OHNO
# Simplified 5/14/1999 by wself@cdrom.com
#
# See /usr/share/examples/ppp/ for some examples
#
# $FreeBSD: src/etc/ppp/ppp.conf,v 1.2.2.5 2001/07/13 10:55:23 brian Exp $
#################################################################
default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)
# Ensure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#
set device PPPoE:lnc0
set speed sync
set mru 1492
set mtu 1492
set ctsrts off
set timeout 30 # 3 minute idle timer (the default)
disable lqr
deny lqr
add default HISADDR
enable dns # request DNS info (for resolv.conf)
hz163: # 注意:这里的hz163是你的ISP名,要比下面的set语句多出一点(一个空格).
set authname user(把这里的user换成你的ADSL用户名)
set authkey password (把这里的password换成你的ADSL密码)
set dial
set login
set ifaddr 10.0.0.1/0 10.0.0.2/0
nat enable yes
# PPP Sample Configuration File
# Originally written by Toshiharu OHNO
# Simplified 5/14/1999 by wself@cdrom.com
#
# See /usr/share/examples/ppp/ for some examples
#
# $FreeBSD: src/etc/ppp/ppp.conf,v 1.2.2.5 2001/07/13 10:55:23 brian Exp $
#################################################################
default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)
# Ensure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#
set device PPPoE:lnc0
set speed sync
set mru 1492
set mtu 1492
set ctsrts off
set timeout 30 # 3 minute idle timer (the default)
disable lqr
deny lqr
add default HISADDR
enable dns # request DNS info (for resolv.conf)
hz163: # 注意:这里的hz163是你的ISP名,要比下面的set语句多出一点(一个空格).
set authname user(把这里的user换成你的ADSL用户名)
set authkey password (把这里的password换成你的ADSL密码)
set dial
set login
set ifaddr 10.0.0.1/0 10.0.0.2/0
nat enable yes
连接网络
配置好了ppp.conf，你就成功了一半，接下来的就是输入命令、连接网络喽！
然后配置rc.conf使ADSL开机上网
想一开机就上网？简单！让我们来配置 /etc/rc.conf吧，这很简单！ 就填上这几句：
ifconfig_lnc0="192.168.0.254/24"
defaultrouter="192.168.0.254"
inetd_enable="yes"
gateway_enable="yes"
ppp_enable="yes"
ppp_mode="ddial"
ppp_nat="yes"
ppp_profile="hz163"
named_enable="yes"
defaultrouter="192.168.0.254"
inetd_enable="yes"
gateway_enable="yes"
ppp_enable="yes"
ppp_mode="ddial"
ppp_nat="yes"
ppp_profile="hz163"
named_enable="yes"
这几句就把FreeBSD虚拟机配置成了一NAT网关，兼软路由、BIND8名字服务器。