Step 9
Here''''s what the scan looks like at this point: STEP 9
之后会得到这样的图：
Step 10
Because I primarily scan for viewing on the screen, not for printing, I resize my scans. I resized this to 98dpi in this instance. STEP 10
因为我起先扫这个图时是为了在电脑屏幕上看，不是为了打印出来，所以我缩小我的
图到98dpi。
Step 11 - sharpening
Sharpening is one of the more important process to bring out the details. For this particular scan, I ran the unsharp mask filter at the setting shown below 4 times. STEP 11：锐化全图
锐化是一个为了使皮肤细节显现出来的重要步骤之一。在这幅图里，我运行了4次USM锐化
Step 12 - Sharpening the skin only
Load up the "skin" selection. Run the unsharp mask filter again to sharpening the skin. Use lower values and remember not to oversharpen! I use 15% and a radius of .03 to sharpen the skin over several times. Remember to use small values and sharpen incrementally. STEP 12 锐化皮肤
载入选区"skin"，再对皮肤运行USM锐化，用低一些的数值，注意不要锐化过度了！我用的是(15%，半径0.03)，锐化了几次。记得用小数值的设置，一点一点的锐化。
